Pellet mill is one of the host equipment of the feed mill, the operator should be pellet machine daily maintenance, weekly maintenance, monthly maintenance work to ensure that the pellet machine to maintain a good and smooth, non-jumping working condition,…
When disassembling the mechanical seal, it is strictly prohibited to use hand hammer and flat shovel to avoid damaging the sealing element. If there are mechanical seals at both ends of the pump, care must be taken during disassembly to…
2023-08-14 Before the enterprise crusher shaft wear problems, the general use of the traditional repair process, such as welding and grinding pad iron sheet, not only time-consuming and labor-intensive, and the use of repair results are not good. This time,…
In recent years, the mechanical equipment of cement enterprises, especially large equipment accidents frequently, causing serious losses to cement enterprises, therefore, cement enterprises in the production process of mechanical equipment repair and maintenance management, need to give the necessary attention…
The beneficiation plant has 2 sets of self-centred vibrating screens, which bear the responsibility of screening the crushed ore and play a very important role in the production of the crushing system and the production of the main field house.…
1 What should I do if the pump is not oiling? The pump does not come out of oil should be checked: (1) If you find that the gear pump does not come out of the oil in the host…
2023-07-10 The rust prevention of bearings is not only during its use, but also during its production and before storage. 1 Inter-process rust management Metal in the process of processing often with dust, moisture and acid fog and other atmospheric…
2023-07-03 Motor as people’s production and life indispensable important power provider, in the use of the process of many motor will appear very serious heat phenomenon, but many times do not know how to solve, more serious is not know…
The spooler is a key piece of equipment in the high-speed wire rod production line and is located between the water-cooled section and the bulk coil transporter after the finishing mill. At high speeds, the spooler can reach 110-160m/s and…